SM-P00077-A/3
1. PRODUCT OVERVIEW
19
2020-04-15
◼
Socket assembly for adding a valve
For the socket assembly for adding a valve, specify a cable of appropriate length depending on the
position where the valve is added.
Incorrect selection may cause the cable to become disconnected or pinched.
For A-type connector socket assembly, the position where the valve is added is indicated by specifying
the row number, which is counted from the side on which the electrical component is mounted. Note that
this counting method is different from the counting method for the manifold valve station number, which
is counted in order from left to right with the b-side solenoid towards the user.
Model number of socket assembly for adding a valve
A-type connector socket assembly
4G*1R-SOCKET-ASSY-A*2 *3-*4
*1: Series
*2: Connection
specifications
*3: Solenoid coil
position
*4: Socket row no.
Symbol Description
Symbol
Description Symbol Description Symbol Description
1
4G1
Blank
Left
A
a-side
1
1st row
2
4G2
R
Right
B
b-side
to
to
3
4G3
24
24th row
For precautions on selecting the model number, refer to the catalog.
1st row
2nd row
3rd row
nth row
Electrical
component block
1st station
nth station
2nd station
3rd station
3rd row
2nd row
1st row
nth row
1st station
nth station
2nd station
3rd station
Connection specifications
Socket row no.
a-side solenoid
b-side solenoid
(cap)
Manifold station no.
<<Left side connection>>
*Rows are counted from the side
electrical component block is mounted!
*Caution: Socket rows and manifold stations
are not counted from the same side!
<<Right side connection>>
* Stations are counted in order from left to right, with
the b-side solenoid (cap) towards the user.
Electrical
component block
