SM-P00077-A/3
3. USAGE
64
2020-04-15
3.1.6
Pressure sensor (option symbol: G1, G2)
DANGER
Do not diassemble or dismantle the pressure sensor.
Parts can fly off when pressure is applied.
Use the product within the specified voltage range.
Applying voltage beyond the specified range may cause a malfunction, damage to the product,
electric shock, or fire.
WARNING
Do not use the product with corrosive gas, combustible gas, and oxygen.
Prevent water, cutting oil, and coolant from splashing onto the product.
The degree of protection of pressure sensor is dust-proof, not drip-proof.
Turn off the power before wiring.
Discharge static electricity from your body, tools, and devices before and during work.
Do not touch electrical wiring connections (bare live parts).
An electric shock may occur.
Do not touch live parts with bare hands.
An electric shock may occur.
Install the product and its wiring away from sources of noise such as high-voltage lines as
much as possible.
Take measures against surges on the power cable, separately.
Do not apply AC power.
Applying AC power (100 VAC) may cause damage to the product, electric shock, or fire.
Do not short-circuit the load.
The product may burst or burn.
Do not incorrectly wire the polarity of the power.
The sensor may fail, burst, or burnt.
CAUTION
Do not use the product in such a way that it is rotated repeatedly.
Although the connection between the sensor body of the pressure sensor (1-port detection type)
and the fitting can be rotated, rotating the product repeatedly can cause damage to the connection.
Do not apply tension and stress to the lead wires of the pressure sensor.
Applying such stress may cause leakage and connection failure.
