Command Modes
EXEC
Command History
Modification
Release
This command was introduced.
Release 3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command can generate a very large amount of output. You may want to redirect the output to a file
using the
file send-to
keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Tip
This command collects relevant data for Layer 2 tunneling protocol-related issues that can be useful for Cisco
Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting
a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.
This command is not required during normal use of the router.
Note
See the Cisco IOS XR Software command references for information about these commands and descriptions
of their command output. The Cisco IOS XR Software command references are located at the following URL:
http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html
Task ID
Operations
Task ID
read
cisco-support
Examples
The following example shows some of the
show tech-support l2tp
command output that is displayed on
the terminal:
RP/0/0/CPU0:router#
show tech-support l2tp terminal page
-------------------------------------------------------------------------------
show tech-support l2tp (Detailed output with event traces)
-------------------------------------------------------------------------------
-------------------------- show l2tp session detail ---------------------------
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
OL-30353-01
229
Tech-Support Commands
show tech-support l2tp