Cisco XR 12000 Reference Download Page 144

Page: 144 / 428

show tech-support aps

To automatically run

show

commands that display debugging information related to automatic protection

switching (APS), use the

show tech-support aps

command in the EXEC mode. This command collects APS

traces and sonet local traces across all locations and also

show controller

and

show aps

commands for all

ports and groups.

show tech-support aps file send-to

[

group| show-only

] [

location node-id

]

Syntax Description

Specifies that the command output is saved to a specified file.

file

Name of the file. The following valid options are listed:

•

filename

•

bootflash: filename

•

compactflash: filename

•

disk0: filename

•

disk1: filename

•

flash: filename

•

ftp: filename

•

harddisk: filename

•

harddiska: filename

•

nvram: filename

•

rcp: filename

•

slot0: filename

•

slot1: filename

•

tftp: filename

send-to

(Optional) Displays the show group commands with no trace for APS debugging.

group

(Optional) Displays the show commands with no trace for APS debugging.

show-only

(Optional) Specifies that the command output is displayed on the terminal.

terminal

(Optional) Specifies a node.

location

(Optional) Node ID. The

node-id

argument is entered in the

rack/slot/module

notation.

node-id

Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x

136

OL-30353-01

Tech-Support Commands

show tech-support aps

Summary of Contents for XR 12000













































































































































































































































































































































































































































Search results

Summary of Contents for XR 12000

Reviews:

Cisco XR 12000, Reference, Page: 144 / 428

Search results

Summary of Contents for XR 12000

Reviews: