show tech-support rdsfs
To automatically run
show
commands that display information specific to Replication Data Services File
System (RDSFS) debugging, use the
show tech-support rdsfs
command in EXEC mode.
show tech-support rdsfs
{
terminal [page]
|
file send-to [background]
[
compressed| uncompressed
]
[rack]
}
Syntax Description
Displays the command output on the terminal.
terminal
(Optional) Displays the command output on a single page at a time. Use the Return
key to display the next line of output or use the space bar to display the next page
of information. If not used, the output scrolls (that is, it does not stop for page
breaks).
Press the
Ctrl-C
keys to stop the command output.
page
Specifies that the command output is saved to a specified file.
file
Name of the file. The following valid options are listed:
•
filename
•
bootflash: filename
•
disk0: filename
•
disk0a: filename
•
disk1: filename
•
disk1a: filename
•
ftp: filename
•
harddisk: filename
•
harddiska: filename
•
harddiskb: filename
•
nvram: filename
•
rcp: filename
•
tftp: filename
send-to
(Optional) Specifies that the command runs in the background.
background
(Optional) Displays compressed command output.
compressed
(Optional) Displays the command output with no compression.
uncompressed
(Optional) Displays the list of racks.
rack
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
312
OL-30353-01
Tech-Support Commands
show tech-support rdsfs