Cisco XR 12000 Reference Download Page 277

Page: 277 / 428

(Optional) Name of the file. The following valid options are listed:

•

filename

•

bootflash: filename

•

disk0: filename

•

disk0a: filename

•

disk1: filename

•

disk1a: filename

•

ftp: filename

•

harddisk: filename

•

harddiska: filename

•

harddiskb: filename

•

nvram: filename

•

rcp: filename

•

tftp: filename

sent-to

(Optional) Specifies that the command runs in the background.

background

(Optional) Displays compressed command output.

compressed

(Optional) Displays the command output with no compression.

uncompressed

(Optional) Displays the multicast source address.

source

(Optional) Source address for multicast.

source address

(Optional) Specifies a node.

location

(Optional) Node ID. The

node-id

argument is entered in the

rack/slot/module

notation.

node-id

(Optional) Displays the list of racks.

rack

(Optional) Specifies a VPN routing and forwarding (VRF) instance.

vrf

(Optional) Name of VRF.

vrf-name

Command Default

Output is logged to the terminal screen.

Command Modes

EXEC

Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x

OL-30353-01

269

Tech-Support Commands

show tech-support multicast

Summary of Contents for XR 12000













































































































































































































































































































































































































































Search results

Summary of Contents for XR 12000

Reviews:

Cisco XR 12000, Reference, Page: 277 / 428

Search results

Summary of Contents for XR 12000

Reviews: