Cisco XR 12000 Reference Download Page 271

Page: 271 / 428

show tech-support mpls traffic-eng

To automatically run

show

commands that display information specific to Multiprotocol Label Switching

(MPLS) Traffic Engineering (TE) debugging, use the

show tech-support mpls traffic-eng

command in

EXEC mode.

show tech-support mpls traffic-eng

{

terminal [page]

file send-to [background]

[

compressed|

uncompressed

]} [

forwarding tunnel-name tunnel name

] [

tunnel-number number

]

Syntax Description

Specifies that the command output is saved to a specified file.

file

Name of the file. The following valid options are listed:

•

filename

•

bootflash: filename

•

disk0: filename

•

disk0a: filename

•

disk1: filename

•

disk1a: filename

•

ftp: filename

•

harddisk: filename

•

harddiska: filename

•

harddiskb: filename

•

nvram: filename

•

rcp: filename

•

tftp: filename

send-to

(Optional) Specifies that the command runs in the background.

background

(Optional) Displays compressed command output.

compressed

(Optional) Displays the command output with no compression.

uncompressed

(Optional) Displays forwarding information for a tunnel.

forwarding

(Optional) Displays the tunnel name that is used by the RSVP process.

tunnel-name

(Optional) Name for the tunnel.

tunnel name

Specifies that the command output is displayed on the terminal.

terminal

Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x

OL-30353-01

263

Tech-Support Commands

show tech-support mpls traffic-eng

Summary of Contents for XR 12000













































































































































































































































































































































































































































Search results

Summary of Contents for XR 12000

Reviews:

Cisco XR 12000, Reference, Page: 271 / 428

Search results

Summary of Contents for XR 12000

Reviews: