show tech-support pfi
To automatically run
show
commands that display information specific to Packet Forwarding Infrastructure
(PFI) debugging for all components, use the
show tech-support pfi
command in EXEC mode.
show tech-support pfi
{
file send-to
[
background| compressed| uncompressed
]|
terminal [page]| trace-only
}
[
location
{
node-id| all
}]
Syntax Description
Specifies that the command output is saved to a specified file.
file
Name of the file. The following valid options are listed:
•
filename
•
bootflash: filename
•
disk0: filename
•
disk0a: filename
•
disk1: filename
•
disk1a: filename
•
ftp: filename
•
harddisk: filename
•
harddiska: filename
•
harddiskb: filename
•
nvram: filename
•
rcp: filename
•
tftp: filename
send-to
(Optional) Specifies that the command runs in the background.
background
(Optional) Displays compressed command output.
compressed
(Optional) Displays the command output with no compression.
uncompressed
Specifies that the command output is displayed on the terminal.
terminal
(Optional) Specifies that the command output is displayed one page at a time.
Use the return key to display the next line of output or use the space bar to
display the next page of information. If not used, the output scrolls (that is, it
does not stop for page breaks).
Press the
Ctrl+C
keys to stop the command output.
page
(Optional) Specifies a node.
location
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
288
OL-30353-01
Tech-Support Commands
show tech-support pfi