show tech-support sysdb
To automatically run
show
commands that display information specific to the System Database (SysDB),
use the
show tech-support sysdb
command in EXEC mode.
show tech-support sysdb
{
terminal [page]
|
file send-to [background]
[
compressed| uncompressed
]}
[
shared-plane| rack
] [
location node-id
]
Syntax Description
Displays the command output on the terminal.
terminal
(Optional) Displays the command output on a single page at a time. Use the
Return key to display the next line of output or use the space bar to display the
next page of information. If not used, the output scrolls (that is, it does not stop
for page breaks).
Press the
Ctrl-C
keys to stop the command output.
page
Specifies that the command output is saved to a specified file.
file
Name of the file. The following valid options are listed:
•
filename
•
bootflash: filename
•
disk0: filename
•
disk0a: filename
•
disk1: filename
•
disk1a: filename
•
ftp: filename
•
harddisk: filename
•
harddiska: filename
•
harddiskb: filename
•
nvram: filename
•
rcp: filename
•
tftp: filename
Iam
sent-to
(Optional) Specifies that the command runs in the background.
background
(Optional) Displays compressed command output.
compressed
(Optional) Displays the command output with no compression.
uncompressed
(Optional) Displays the data for the shared plane.
shared-plane
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
362
OL-30353-01
Tech-Support Commands
show tech-support sysdb