Cisco XR 12000 Reference Download Page 311

Page: 311 / 428

show tech-support qos

To automatically run

show

commands that display platform independent Quality of Service (QoS) debugging

information, use the

show tech-support qos

command in EXEC mode.

show tech-support qos pi

[

file send-to

]

[background]

[

compressed| uncompressed

] [

location node-id|

all

]

[rack]

Syntax Description

Collects platform independent QOS related information and saves to disk.

Specifies that the command output is saved to a specified file.

file

Name of the file. The following valid options are listed:

•

filename

•

bootflash: filename

•

disk0: filename

•

disk0a: filename

•

disk1: filename

•

disk1a: filename

•

ftp: filename

•

harddisk: filename

•

harddiska: filename

•

harddiskb: filename

•

nvram: filename

•

rcp: filename

•

tftp: filename

send-to

(Optional) Specifies that the command runs in the background.

background

(Optional) Displays compressed command output.

compressed

(Optional) Displays the command output with no compression.

uncompressed

(Optional) Specifies a node.

location

(Optional). Node ID. The

node-id

argument is entered in the

rack/slot/module

notation.

node-id

(Optional) Displays the list of racks.

rack

Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x

OL-30353-01

303

Tech-Support Commands

show tech-support qos

Summary of Contents for XR 12000













































































































































































































































































































































































































































Search results

Summary of Contents for XR 12000

Reviews:

Cisco XR 12000, Reference, Page: 311 / 428

Search results

Summary of Contents for XR 12000

Reviews: