show controllers fabricq registers
To display the hardware registers of the chopper and assembler FPGAs, use the
show controllers fabricq
registers
command in administration EXEC mode.
show controllers fabricq registers [detail]
[
location node-id
]
Syntax Description
(Optional) Displays detailed statistical information.
detail
(Optional) Displays statistical information for the designated node. The
node-id
argument is entered in the
rack/slot/module
notation.
location node-id
Command Default
Information for all route processors (RPs) on the router is displayed
Command Modes
Administration EXEC
Command History
Modification
Release
This command was introduced.
Release 3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the
show controllers fabricq registers
command to display the hardware registers of the chopper and
assembler FPGAs. Specifying a location displays information only if that location is an RP.
This command is intended for use while performing debugging procedures.
Task ID
Operations
Task ID
read, write
root-system
Examples
The following is sample output from the
show controllers fabricq registers
command for location 0/1/CPU0:
RP/0/0/CPU0:router#
admin
RP/0/0/CPU0:router(admin)#
show controllers fabricq registers location 0/1/CPU0
Location 0/1/0:
Chopper Registers:
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
118
OL-30353-01
Fabric Management Commands
show controllers fabricq registers