Cisco XR 12000 Reference Download Page 283

Page: 283 / 428

show tech-support netflow

To automatically run

show

commands that display information specific to netflow debugging, use the

show

tech-support netflow

command in EXEC mode.

show tech-support netflow file send-to

[

location node-id

]

[rack]

Syntax Description

Specifies that the command output is saved to a specified file.

file

Name of the file. The following valid options are listed:

•

filename

•

bootflash: filename

•

disk0: filename

•

disk0a: filename

•

disk1: filename

•

disk1a: filename

•

ftp: filename

•

harddisk: filename

•

harddiska: filename

•

harddiskb: filename

•

nvram: filename

•

rcp: filename

•

tftp: filename

send-to

(Optional) Specifies a node.

location

(Optional) Node ID. The

node-id

argument is entered in the

rack/slot/module

notation.

node-id

(Optional) Displays the list of racks.

rack

Command Modes

EXEC

Command History

Modification

Release

This command was introduced.

Release 3.9.0

Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x

OL-30353-01

275

Tech-Support Commands

show tech-support netflow

Summary of Contents for XR 12000













































































































































































































































































































































































































































Search results

Summary of Contents for XR 12000

Reviews:

Cisco XR 12000, Reference, Page: 283 / 428

Search results

Summary of Contents for XR 12000

Reviews: