![background image](http://html.mh-extra.com/html/cisco/wip310-iphone-wireless-voip-phone/wip310-iphone-wireless-voip-phone_administration-manual_65025132.webp)
Provisioning Basics
Upgrading, Resyncing, and Rebooting Phones
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
121
6
Upgrading, Resyncing, and Rebooting Phones
Cisco IP phones support secure remote provisioning and firmware upgrades. You
can generate configuration profiles using common, open-source tools that
integrate with service provider provisioning systems. Supported transport
protocols include TFTP, HTTP, and HTTPS with client certificates.
256-bit symmetric key encryption of profiles is supported. In addition, an
unprovisioned Cisco IP phone can receive an encrypted profile specifically
targeted for that device without requiring an explicit key. a secure first-time
provisioning mechanism using SSL functionality.
1-
User intervention is not required to initiate or complete a profile update or
firmware upgrade. The Cisco IP phone upgrade logic is capable of automating
multi-stage upgrades, if intermediate upgrades are required to reach a future
upgrade state from an older release. A profile resync is only attempted when the
Cisco IP phone is idle, because this may trigger a software reboot.
General purpose parameters are provided to help service providers manage the
provisioning process. Each Cisco IP phone can be configured to periodically
contact a normal provisioning server (NPS). Communication with the NPS does not
require the use of a secure protocol because the updated profile is encrypted by
a shared secret key. The NPS can be a standard TFTP, HTTP or HTTPS server.
The administrator can upgrade, reboot, restart, or resync Cisco IP phones using
the web interface. The administrator can also perform these tasks using a SIP
notify message and bypassing the web interface.
Upgrading Firmware on a Phone
Use the upgrade URL to upgrade firmware on the Cisco IP phone. You can
upgrade from either a TFTP or HTTP server.
The Upgrade Enable parameter on the Provisioning web page must be set to yes:
Cisco IP phone web UI: Provisioning > Firmware Upgrade > Upgrade Enable: yes
Use the following syntax to upgrade firmware on a phone:
http://
phone-ip-address
/admin/upgrade?protocol://server-
name[:port]]/firmware-path
•
Protocol defaults to TFTP.
•
Server name is the host requesting the URL.