![background image](http://html.mh-extra.com/html/cisco/wip310-iphone-wireless-voip-phone/wip310-iphone-wireless-voip-phone_administration-manual_65025179.webp)
Configuring the Cisco SPA500S Attendant Console
Setting Up the Cisco SPA500S Attendant Console
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
168
9
STEP 7
Select your
Server Type
from the drop-down list:
•
SPA9000
•
BroadSoft
•
Asterisk
STEP 8
Make sure that
no
is selected for
Test Mode Enable
. This option is disabled by
default. You cannot complete the software configuration for the Cisco SPA500S if
this option is enabled. (You can use Test Mode Enable later to test the Cisco
SPA500S.)
STEP 9
Create a configuration script for each target extension or user you want to monitor
using the Cisco SPA500S. Enter this script in the appropriate field for each unit/
key. See
“Unit/Key Configuration Scripts” section on page 168
.
STEP 10
Click Submit All Changes.
The Cisco SPA500S allows only one unit/key entry for each target extension or
user. The subscription for the user fails if the user is configured on more than one
unit/key, or if the target extension is a shared extension. For example, the following
configuration would
fail
. It shows user 101 subscribed for two different functions
on two unit/keys; all functions should be put on one unit/key:
Unit/key1: func=sd;usr=101@$PROXY;nme=test;vid=2;sub=arupiSSomSok1@$PROXY
Unit/key2: fnc=blf+cp;usr=101@$PROXY;nme=test;vid=2;sub=arupiSSomSok1@$PROXY
Unit/Key Configuration Scripts
By default, all LEDs on the Cisco SPA500S are assigned to the first configured
extension on the phone to which it is connected. Assign the LEDs to any of the
other five extensions on the phone that you want to monitor using the Cisco
SPA500S.
The configuration script is composed of the following keywords, followed by an
equal sign (=) and separated by semicolons (;):
•
fnc—defines which of the following functions are enabled for the specified key
[separate more than one function with a plus sign (+)]:
•
blf—busy lamp field function used for monitoring line activity
•
sd—speed dial function