manualshive.com logo in svg

Cisco WIP310 - iPhone Wireless VoIP Phone, Administration Manual

The Cisco WIP310 - iPhone Wireless VoIP Phone is a cutting-edge device that allows you to make calls over the internet with the convenience of your iPhone. To get started quickly and easily, download the free user manual from our website, manualshive.com, to explore all the features and functionalities this product has to offer.

Share
Download
background image

Configuring SIP, SPCP, and NAT

Configuring SIP

Cisco SPA500 Series and WIP310 IP Phone Administration Guide

83

4

 

STEP  5

Under SIP Settings, configure the following fields:

Network Jitter Level 

Determines how jitter buffer size is adjusted by the SPA9000. 
Jitter buffer size is adjusted dynamically. The minimum jitter 
buffer size is 30 milliseconds or (10 millis current RTP 
frame size), whichever is larger, for all jitter level settings. 
However, the starting jitter buffer size value is larger for higher 
jitter levels. This setting controls the rate at which the jitter 
buffer size is adjusted to reach the minimum. Select the 
appropriate setting: low, medium, high, very high, or extremely 
high.

Defaults to high.

Jitter Buffer 
Adjustment 

Controls how the jitter buffer should be adjusted. Select the 
appropriate setting: up and down, up only, down only, or 
disable.

Defaults to up and down.

Parameter

 Description

Parameter

 Description

SIP Transport

Select from UDP, TCP, or TLS.

Defaults to UDP.

SIP Port 

Port number of the SIP message listening and transmission 
port.

Defaults to 5060. 

SIP 100REL Enable

To enable the support of 100REL SIP extension for reliable 
transmission of provisional responses (18x) and use of PRACK 
requests, select yes. Otherwise, select no.

Defaults to no.

EXT SIP Port

The external SIP port number. 

Auth Resync-Reboot 

If this feature is enabled, the Cisco IP phone authenticates the 
sender when it receives the NOTIFY resync reboot (RFC 2617) 
message. To use this feature, select yes. Otherwise, select no.

Defaults to yes.

Summary of Contents for WIP310 - iPhone Wireless VoIP Phone





















































































































































































































































































Reviews:

No comments

Related manuals for WIP310 - iPhone Wireless VoIP Phone

H3C Voice Gateway H3C VG 10-10 Safety Manual preview
Voice Gateway H3C VG 10-10
Brand: H3C Pages: 31
H3C SR6602-I AI Series Installation Manual preview
SR6602-I AI Series
Brand: H3C Pages: 80
H3C SR6602-I AI Series Hardware Information preview
SR6602-I AI Series
Brand: H3C Pages: 33
H3C SecPath M9000 Series Quick Manual preview
SecPath M9000 Series
Brand: H3C Pages: 4
H3C SecPath M9000 Series Installation, Quick Start preview
SecPath M9000 Series
Brand: H3C Pages: 15
H3C MSR3610-I Series Installation, Quick Start preview
MSR3610-I Series
Brand: H3C Pages: 5
H3C SecPath M9000 Series Compliance And Safety Manual preview
SecPath M9000 Series
Brand: H3C Pages: 57
QTS AN-X3-GENI User Manual preview
AN-X3-GENI
Brand: QTS Pages: 62
B meters RFM-C2 WMBUS User Manual preview
RFM-C2 WMBUS
Brand: B meters Pages: 29
QUPIT 159-01 Installation Manual preview
159-01
Brand: QUPIT Pages: 16
QUNDIS Q node 5.5 Operating And Installation Instructions preview
Q node 5.5
Brand: QUNDIS Pages: 48
ADTRAN 834-v6 Quick Start Manual preview
834-v6
Brand: ADTRAN Pages: 8
Inteno DG201 R1 Installation Manual preview
DG201 R1
Brand: Inteno Pages: 10
SiKom GSM Eco Comfort 300-9050V11 User And Installation Manual preview
GSM Eco Comfort 300-9050V11
Brand: SiKom Pages: 2
Anywire ASLINK B2G78-PB1 User Manual preview
ASLINK B2G78-PB1
Brand: Anywire Pages: 50
Patton SmartNode 4970 Series Quick Start Manual preview
SmartNode 4970 Series
Brand: Patton Pages: 8
Cal Amp Phantom II Operating Manual preview
Phantom II
Brand: Cal Amp Pages: 164
enphase Envoy Communications Gateway Installation And Operation Manual preview
Envoy Communications Gateway
Brand: enphase Pages: 100

Brands by name

Popular brands

Load more brands