![background image](http://html.mh-extra.com/html/cisco/wip310-iphone-wireless-voip-phone/wip310-iphone-wireless-voip-phone_administration-manual_65025268.webp)
SPA and Wireless IP Phone Field Reference
User Tab
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
257
B
Screen (SPA525G)
Parameter
Description
Screen Saver Enable
Enables a screen saver on the phone’s LCD. When the phone
is idle for a specified time, it enters screen saver mode.
(Users can set up screen savers directly using phone Setup
button.) Any button press or on/off hook event triggers the
phone to return to its normal mode. (The screen shows
“Press any key to unlock your phone.”) If a user password is
set, the user must enter it to exit screen saver mode.
Screen Saver Type
Choose the type of screen saver:
•
Black Background—Displays a black screen.
•
Gray Background—Displays a gray screen.
•
Black/Gray Rotation—The screen incrementally cycles
from black to gray.
•
Picture Rotation—The screen rotates through available
pictures on the phone.
•
Digital Frame—Shows the background picture.
Screen Saver Trigger
Time
Number of seconds that the phone remains idle before
the screen saver turns on.
Screen Saver Refresh
Time
Number of seconds before the screen saver should refresh
(if, for example, you chose a rotation of pictures).
Text Logo
Text logo to display when the phone boots up. A service
provider, for example, can enter logo text as follows:
•
Up to 2 lines of text
•
Each line must be fewer than 32 characters
•
Insert a new line character (\n) between lines
•
Insert escape code %0a
For example, “Super\n%0aTelecom” will display:
Super
Telecom
For more information, see the
“Configuring Phone
Information and Display Settings” section on page 32.