Configuring the Cisco SPA500S Attendant Console
Setting Up the Cisco SPA500S Attendant Console
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
172
9
STEP 5
In the BLF List URI field, enter the URI to generate BLF keys:
[email protected];vid=2
Where:
•
listname: Name of the list.
•
domain.com: Name of the domain.
•
vid: Assigns keys to the extension. By default, the SUBSCRIBE is sent when
“Ext 1” is registered. You must set the “vid=” to a different value to change
this behavior.
For example:
[email protected];vid=2
STEP 6
Click Submit All Changes.
Attendant Console Parameters
Parameters in the Attendant Console web page are described in the following
table. For information about Unit/Key syntax, see the previous sections.
.
Parameter
Description
Subscribe Expires
Specifies how long the subscription remains valid.
After the specified period of time, elapses, the Cisco
SPA500S initiates a new subscription.
Defaults to 1800.
Subscribe Retry Interval
Specifies the length of time to wait to try again if
subscription fails.
Unit 1 Enable
Enables or disables the first Cisco SPA500S unit (each
phone can have up to two Cisco SPA500S units
attached).
Unit 2 Enable
Enables or disables the second Cisco SPA500S unit
(each phone can have up to two Cisco SPA500S units
attached).
Subscribe Delay
Length of delay before attempting to subscribe.
Defaults to 1.
