Appendix A Regulatory Compliance and Technical Specifications
Regulatory Compliance
A-2
Cisco VG248 Analog Phone Gateway Hardware Installation Guide
78-13154-01
EMC Environmental conditions for product to be installed in the European Union.
This equipment is intended to operate under the following environmental
conditions with respect to EMC:
1.
A separate defined location under user’s control.
2.
Earthing and bonding shall meet the requirements of ETS 300 253 or CCITT
K27.
3.
Where applicable, AC power distribution shall be one of the following types:
TN-S and TN-C [as defined in IEC 364-3].
In addition, if equipment is operated in a domestic environment, interference may
occur.
EMI Class A Warnings
(FCC) Class A Warning
Warning
Modifying the equipment without Cisco's authorization may result in the
equipment no longer complying with FCC requirements for Class A or Class
B digital devices. In that event, your right to use the equipment may be
limited by FCC regulations, and you may be required to correct any
interference to radio or television communications at your own expense.
[cfr reference 15.21]
Warning
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense. [cfr reference 15.105]
