Chapter 3 Installing the VG248
Installing the VG248
3-2
Cisco VG248 Analog Phone Gateway Hardware Installation Guide
78-13154-01
Warning
To prevent bodily injury when mounting or servicing this unit in a
rack, you must take special precautions to ensure that the system
remains stable. The following guidelines are provided to ensure
your safety:
•
This unit should be mounted at the bottom of the rack if it is the only unit in
the rack.
•
When mounting this unit in a partially filled rack, load the rack from the
bottom to the top with the heaviest component at the bottom of the rack.
•
If the rack is provided with stabilizing devices, install the stabilizers before
mounting or servicing the unit in the rack.
Attaching the Brackets
The chassis comes with brackets for use with a 19-inch rack. To install the chassis
in a rack, attach the brackets in one of the following ways:
•
With the front panel forward (see
Figure 3-1
)
•
With the rear panel forward (see
Figure 3-2
)
These figures (
Figure 3-1
and
Figure 3-2
) show how to connect the bracket to one
side of the chassis. The second bracket connects to the opposite side of the
chassis.
Caution
Only use the screws provided when attaching the brackets.
