Cisco StadiumVision SV-4K Deployment Manual Download

Page: 27 / 76

Planning the SV-4K Media Player
Deployment

This module describes aspects of the SV-4K deployment that need to be considered
and executed prior to the actual installation and provisioning of the SV-4K media
players.

It is intended for installers, network administrators, and administrators of Cisco
StadiumVision Director.

Workflow Summary to Plan Deployment of the
SV-4K Media Player

Table 13

provides a summary of the tasks and related information to plan for the

deployment of the SV-4K media player.

Table 13. Deployment Planning Task Summary

Planning Task

For more information see:

Plan Groups/Zones/Locations.

"Zones, Groups and Locations Planning" on the
next page

Perform TV qualification.

"TV Requirements for SV-4K Compliance" on
the next page

"Guidelines for TV and Content Resolution
with the SV-4K Media Player" on page 21

Prepare for SV-4K installation.

"Using Bar Code Scanners and TV Labels at
Installation Time " on page 18

"Guidelines for Mounting the SV-4K" on
page 7

Determine cabling requirements.

"Best Practices for SV-4K Deployment" on
page 18

Plan the Connected Stadium switch
configuration.

"Connected Stadium Switch Requirements" on
page 24

19 of 68

Summary of Contents for StadiumVision SV-4K










































































Search results

Summary of Contents for StadiumVision SV-4K

Reviews:

Related manuals for StadiumVision SV-4K

Brands by name

Popular brands

Cisco StadiumVision SV-4K, Deployment Manual

Search results

Summary of Contents for StadiumVision SV-4K

Reviews:

Related manuals for StadiumVision SV-4K

Brands by name

Popular brands