Key Considerations for the SV-4K
When you deploy an SV-4K, there are several things that you should know about its
operation.This section highlights some of the important differences from the Cisco DMP
4310G that you should be aware of when deploying the SV-4K media player.
This section includes the following topics:
l
Firmware Provisioning on the SV-4K, Page 15
l
Auto-Provisioning on the SV-4K, Page 16
l
IR Receiver for the SV-4K, Page 16
l
l
Synchronization on the SV-4K, Page 17
l
Switch Communication on the SV-4K, Page 17
Firmware Provisioning on the SV-4K
The SV-4K firmware is not provisioned the same way as the Cisco DMP 4310G. The
primary difference is that the SV-4K firmware upgrade cannot be manually launched by
Management Dashboard DMP command, but is done automatically when the SV-4K
device boots.
IMPORTANT:
Before you power on the SV-4K device for the
first time, be sure that you have completed the following
configuration and tasks:
l
Switch configuration, including the required LLDP for
proper POE+ operation.
l
DHCP server configuration.
l
Uploaded the released firmware to Cisco StadiumVision
Director.
l
Configured the auto-registration settings for the SV-4K to
properly provision its firmware.
However there are some common configuration tasks.
provides a summary of
the firmware provisioning tasks for the SV-4K and DMP 4310G in the Management
Dashboard.
© Cisco Systems, Inc. All rights reserved.
15 of 68
