Figure 12. Normal Compliance for an SV-4K Device
Table 19. SV-4K Compliance Property Descriptions
Property Name
Description
init.sshd
Unused. Value is always 1 and is not configurable.
init.DHCP
Value is always "on." Static IP addresses are not supported.
init.BCNT
Unused. This value is not configurable.
init.startService_
rs232
Value is always "yes."
init.startService_
ntpc
NTP client service on the SV-4K device. Value is always "yes."
init.version
SV-4K firmware version.
ntpc.timezone
Timezone for the SV-4K.
ntpc.hostname
Name of the NTP server for the SV-4K. For PTP slaves, setting the
time via NTP is disabled on SV-4K.
ntpc.interval
Interval (in seconds) after which the SV-4K PTP master
synchronizes its time with the NTP host.
msi.sw_vlan
Switch VLAN reported by LLDP for the SV-4K.
"$svd_ignore" setting in Cisco StadiumVision means that the value
is not used for compliance verification.
To verify SV-4K media player compliance, complete the following steps:
1. From the Management Dashboard, run the
Get Status
command for selected SV-
4K devices:
a. Go to:
DMP and TV Controls
>
Monitoring
>
Get Status
b. In the Select Devices panel, select all SV-4K devices that you want an
updated status for.
© Cisco Systems, Inc. All rights reserved.
45 of 68
