Cisco StadiumVision SV-4K Deployment Manual Download

Page: 26 / 76

Best Practices for SV-4K Deployment

Using Bar Code Scanners and TV Labels at Installation
Time

NOTE:

This practice requires that you have already defined your

Location names in Cisco StadiumVision Director.

To increase the speed and accuracy of media player deployment:

Prepare TV labels with the Cisco StadiumVision Director Location name in bar
code format.

Obtain a bar code scanner to record the Location bar code and MAC address from
the media player.

Use the BAT tool to upload data to Cisco StadiumVision Director.

Installer Workflow Example

An installer can follow these steps to use a bar code scanner with TV labels:

1. Mount the TV and media player.

2. Connect the TV and media player cables.

3. Attach a pre-printed label to TV.

4. Scan the Location bar code on the TV.

5. Scan the MAC address bar code on the media player.

6. Provide scanner to the supervisor or network administrator who downloads the

data and formats it to be compatible with the Cisco StadiumVision Director BAT
TSV format.

For more information, see the

Cisco StadiumVision Director Bulk Adminstration

Tool

guide.

18 of 68

Summary of Contents for StadiumVision SV-4K










































































Search results

Summary of Contents for StadiumVision SV-4K

Reviews:

Related manuals for StadiumVision SV-4K

Brands by name

Popular brands

Cisco StadiumVision SV-4K, Deployment Manual

Search results

Summary of Contents for StadiumVision SV-4K

Reviews:

Related manuals for StadiumVision SV-4K

Brands by name

Popular brands