Cisco StadiumVision SV-4K Deployment Manual Download | Manualshive

Page: 36 / 76

background image

Deployment Task

For more information see:

Configure firmware settings for auto-registration.

"Configuring the SV-4K for Auto-

Registration" on page 31

Configure global SV-4K settings.

"Configuring the SV-4K Global Settings" on

Power on the SV-4K device.

—

Verify the startup sequence.

"Verifying the SV-4K Startup Sequence" on

Prerequisites for SV-4K Deployment

Before you deploy SV-4K media players, be sure that the following requirements are
met:

l

The pre-deployment tasks are completed. For more information, see

SV-4K Media Player Deployment" on page 19

.

l

The SV-4K hardware is not yet powered up.

Provisioning the SV-4K Firmware

Each time the SV-4K device powers on or reboots, a compliance check is done against
the firmware that is loaded on the device against the Cisco StadiumVision Director
auto-registration settings. If the firmware versions do not match, the SV-4K initiates a
firmware upgrade automatically.

Before the SV-4K device can update the firmware, the firmware must be uploaded to
Cisco StadiumVision Director and the auto-registration settings must be configured.

28 of 68

© Cisco Systems, Inc. All rights reserved.

«
...
34
35
36
37
38
...
»

Summary of Contents for StadiumVision SV-4K













































































Reviews:

No comments

Related manuals for StadiumVision SV-4K

Brand: Samson Pages: 28

VLT DeviceNet MCA 104

Brand: Danfoss Pages: 18

Brand: Danfoss Pages: 138

Brand: Danfoss Pages: 108

Brand: Danfoss Pages: 149

Brand: Vdwall Pages: 12

Brand: Vdwall Pages: 5

Brand: Yamaha Pages: 30

Brand: Yamaha Pages: 30

Brand: Yamaha Pages: 56

POCKETRAK 2G - 2 GB Digital Player

Brand: Yamaha Pages: 40

Brand: Yamaha Pages: 2

Brand: Yamaha Pages: 20

RX-Z11 - AV Receiver

Brand: Yamaha Pages: 4

Brand: CHD Elektroservis Pages: 20

MIXHITS iSTREAM2

Brand: ESS Pages: 4

Brand: ScienTECH Pages: 12

Vertex VCE6-HFC-4C

Brand: Spirent Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands