Audio Cables
Audio cables are not generally needed. However, there are a couple of cases where
you might need to make an audio connection to the SV-4K:
l
If you need to support an HDMI-to-DVI connection from the SV-4K to the TV since
this supports video only.
l
If you need to connect to external audio distribution equipment when audio is to
be distributed within an area.
SV-4K RS-232 Serial Pinout
provides the pinout for the DE-9 serial connector on the front panel of the SV-
4K.
Table 7. SV-4K Serial DE-9 Pinout
Pin Description
Pin Description
1
NC
2
Receive data into the
device
3
Transmit data out of the
device
4
Available 5V@500mA
5
Ground
6
NC
7
RTS
8
CTS
9
NC
Guidelines for Mounting the SV-4K
Consider the following guidelines before mounting the SV-4K:
l
Does not fit in Sunbrite cases that might be in use for some Cisco DMP 4310G
outdoor deployments.
l
Full dimensions with mounting brackets:
196.20 mm long / 164.15 mm wide / 61.65 mm high
(7.72 in long / 6.46 in wide / 2.43 in high)
l
Weight: 28 oz / 793.8 grams.
l
Attach to the wall using the brackets on each side of the device using 4 screws
(one for each bracket slot) that measure between 3.5 mm and 4.2 mm in diameter.
l
Avoid blocking the right side panel so that LEDs can be seen for troubleshooting.
l
Ensure all air vents are clear for proper cooling.
© Cisco Systems, Inc. All rights reserved.
7 of 68
