Guidelines for TV and Content Resolution with the SV-4K
Media Player
The SV-4K is set to run in full high-definition (HD) 1920x1080 mode by the runtime
software.
IMPORTANT:
It is highly recommended that your TV supports a
minimum of 1080p HD resolution. Lower resolution displays
might need some additional configuration of the TV Display
Specification configuration in Cisco StadiumVision Director to
attempt to optimize the display. In some cases these TVs might
cut off an area of the screen, rather than resize the graphics to the
area as the Cisco DMP 4310G does.
The quality and expected resolution for video and graphics display for the SV-4K can
be affected by several things:
l
The resolution of the TV display and its ability to negotiate to 1080p.
l
The configuration of the sv4k.videoMode serial command in the Display
Specifications area of the Cisco StadiumVision Director Control Panel:
o
When set to a resolution, this value specifies the SV-4K signal resolution.
o
If the resolution is set to auto-detection, then the TV negotiates the signal
resolution with the SV-4K.
l
The template region size.
l
The size of the original graphic and whether any scaling needs to happen.
NOTE:
For more information about content and template
guidelines, see the
Content Creation Design and Specifications
Guide for the DMP 4310G and SV-4K
Restrictions for Control Panel TV Display Specifications
with the SV-4K Media Player
Before you configure TV display specifications for use with the SV-4K media player,
consider the following restrictions:
l
The following Basic Info options are not supported:
o
X Position / Y Position
o
X Scaling / Y Scaling
© Cisco Systems, Inc. All rights reserved.
21 of 68
