Cisco StadiumVision SV-4K Deployment Manual Download | Manualshive

Page: 28 / 76

background image

Planning Task

For more information see:

Plan the DHCP server configuration.

"External DHCP Server Requirements" on
page 23

Determine the network time (clocking) sources.

"How to Configure PTP for the SV-4K Media
Player" on page 1

Zones, Groups and Locations Planning

IMPORTANT:

Mixed groups that contain both SV-4K devices

and Cisco DMP 4310G devices are not recommended. Cisco
StadiumVision Director will provide a warning about such groups
if you attempt to configure them.

TV Planning for the SV-4K Media Player

This section includes the following topics:

l

TV Requirements for SV-4K Compliance, Page 20

l

Guidelines for TV and Content Resolution with the SV-4K Media Player, Page 21

l

Restrictions for Control Panel TV Display Specifications with the SV-4K Media
Player, Page 21

l

Configuring Resolution Under Control Panel Display Specifications, Page 22

TV Requirements for SV-4K Compliance

For the optimal experience with the SV-4K media player, be sure that the site
TV displays are compliant with the following specifications and resolution:

l

High-bandwidth Digital Content Protection (HDCP)

l

High-Definition Multimedia Interface (HDMI)

l

RS-232 serial interface

l

Capable of 1080p HD display

20 of 68

© Cisco Systems, Inc. All rights reserved.

«
...
26
27
28
29
30
...
»

Summary of Contents for StadiumVision SV-4K













































































Reviews:

No comments

Related manuals for StadiumVision SV-4K

Brand: KAMAI Pages: 8

Brand: Kaleidescape Pages: 2

Brand: U.S. Converters Pages: 19

Brand: Rave-MP Pages: 36

Brand: Jensen Pages: 15

Brand: Avermedia Pages: 1

PROFI BUS Multiturn 5868 Series

Brand: Sendix Pages: 22

Brand: JBSYSTEMS Light Pages: 29

Brand: Control Techniques Pages: 56

Brand: Orbis Pages: 2

Brand: StarTech.com Pages: 24

Brand: Racal Instruments Pages: 12

Brand: B&K Pages: 2

Brand: Jensen Pages: 13

Brand: Niko Pages: 8

Brand: Curtis Pages: 13

RS-232 to Ethernet Converter ES1A

Brand: B&B Electronics Pages: 54

Brand: Harman Kardon Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands