Networking
VLAN Configuration
Cisco SA 500 Series Security Appliances Administration Guide
79
3
Creating VLAN IDs
Before you can configure a new VLAN, you need to create the VLAN IDs. Later you
will assign VLAN IDs to ports on the Port VLANs page.
STEP 1
Click
Networking
on the menu bar, and then click
VLAN > Available VLANs
in the
navigation tree.
The Available VLANs page appears. The default VLAN and any other VLANs
appear in the List of available VLANs table. The default VLAN ID is 1.
STEP 2
To add a VLAN, click
Add
.
NOTE
Other options:
To delete an entry, check the box, and then click
Delete
. To
edit an entry, check the box, and then click the
Edit
button. To select all
entries in the table, check the box at the left side of the heading row.
After you click Add or Edit, the VLAN Configuration page appears.
STEP 3
Enter the following information:
•
Name:
Enter a descriptive name, for reference.
•
ID:
Enter a unique identification number, which can be any number from 2 to
4091.
NOTE
VLAN ID 1 is reserved for the default VLAN, which is used for
untagged frames received on the interface. VLAN IDs 4092 is
reserved and cannot be used.
•
Inter VLAN Routing Enable:
Check the box if you want to allow the SA 500
to route traffic between this VLAN and other VLANs that also have inter-
VLAN routing enabled. Uncheck the box to disable inter-VLAN routing for this
VLAN.
STEP 4
Click
Apply
to save your settings, or click
Reset
to revert to the saved settings.