Network Management
SNMP
Cisco SA 500 Series Security Appliances Administration Guide
218
10
NOTE
Click the
Edit
button to edit an entry. To delete an entry, check the box and then click
Delete
. To select all entries, check the box in the first column of the table heading.
The SNMP Configuration page appears.
STEP 3
Enter the following information:
•
IP Address:
Enter the IP Address of the SNMP manager or trap agent.
•
Subnet Mask:
Enter the network mask used to determine the list of allowed
SNMP managers.
•
Port:
Enter the SNMP trap port of the IP address to which the trap messages
will be sent.
STEP 4
Click
Apply
to save your settings, or click
Reset
to revert to the saved settings.
Configuring SNMP System Info
You can use this page to configure the MIB (Management Information Base) fields.
STEP 1
Click
Network Management
on the menu bar, and then click
SNMP > SNMP
System Info
in the navigation tree.
The SNMP System Info page appears.
STEP 2
Enter the following information:
•
SysContact:
The name of the contact person for this security appliance.
•
SysLocation:
The physical location of the security appliance.
•
SysName:
A name given for easy identification of the security appliance.
STEP 3
Click
Apply
to save your settings, or click
Reset
to revert to the saved settings.
