Wireless
Modifying Advanced Settings
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
83
4
Transmit
Power
Select the value for the transmit power level for this access
point:
•
Low
•
Medium
•
High
•
Full
The default value, which is Full, can be more cost-efficient
than a lower level since it gives the access point a maximum
broadcast range and reduces the number of access points
needed.
To increase capacity of the network, place access points
closer together and reduce the value of the transmit power.
This helps reduce overlap and interference among access
points. A lower transmit power setting can also keep your
network more secure because weaker wireless signals are
less likely to propagate outside of the physical location of
your network.
Fixed Multicast
Rate
Select the multicast traffic transmission rate you want the
access point to support.
Table 19 Advanced Settings Field Descriptions
Field
Description