Setup
Enabling the Network Time Protocol
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
45
3
Adjust Time for Daylight
Savings
Select the Daylight Savings option to adjust the
system time for Daylight Savings Time (DST). Fields
appear in order to select the date and time to start
and end DST.
DST Start (24 HR)
Use this field to configure Daylight Savings Time to
start. The start time is relative to standard time. If the
starting month is after the ending month, the system
assumes that you are in the southern hemisphere.
From the week list, select the week of the month
(First, Second, ..., Last).
From the day list, select the day of the week
(Sunday, Monday...).
From the month list, select the month (January,
February...).
Specify the time (24-hour format) by selecting the
hours and minutes.
DST End (24 HR)
Use this field to configure Daylight Savings Time to
end. The end time is relative to Daylight Savings
Time.
From the week list, select the week of the month
(First, Second, ..., Last).
From the day list, select the day of the week
(Sunday, Monday...).
From the month list, select the month (January,
February...).
Specify the time (24-hour format) by selecting the
hours and minutes.
DST Offset (minutes)
From the DST Offset list, select the number of
minutes to add during Daylight Savings Time (15 to
120 in 15-minute increments).
Table 9 TIme Settings (NTP)
Field
Description
