Console Menu Interface
Console Interface Main Menu
Cisco 500 Series Stackable Managed Switch Administration Guide
459
25
Select
Default VLAN Setup
to display the
Default VLAN Setup
.
IP Configuration
Path:
Switch Main Menu
>
System Configuration Menu
>
IP Configuration
Use the
IP Configuration
menu to configure the following options:
•
IPv4 Address Configuration
•
IPv6 Address Configuration
•
HTTP Configuration
•
HTTPS Configuration
•
Network Configuration
•
IPv4 Default Route (Layer 3 devices only)
IPv4 Address Configuration
Path:
Switch Main Menu
>
System Configuration Menu
>
IP Configuration
Use the
IPv4 Address Configuration Menu
to configure the switch IPv4 address.
IPv4 Address Settings
Path:
Switch Main Menu
>
System Configuration Menu
>
IP Configuration
Use
IP Address - Add/IP Address Settings
to add or change the switch IPv4
address.
•
IPv4 Address—Enter the IPv4 address that you want to assign to the switch
if the switch is disabled as a DHCP client. Verify that the IP address does
not conflict with another device on the network.
•
Subnet Mask—Enter the subnet mask that you want to assign to the switch.
•
Default Gateway—Enter the default gateway address for the switch (
IPv4
Address Settings
).
•
Management VLAN—Enter the management VLAN ID (
IPv4 Address
Settings
).
•
DHCP Client—Use the
Spacebar
to enable or disable the DHCP client.
