manualshive.com logo in svg

Cisco SF500-24, Administration Manual

The Cisco SF500-24 boasts a comprehensive Administration Manual that enables users to harness its full potential. This detailed manual can be easily downloaded for free from manualshive.com, providing step-by-step instructions and valuable insights, ensuring seamless implementation and efficient utilization of this exceptional networking product.

Share
Download
background image

Configuring Multicast Forwarding

Adding IP Multicast Group Addresses

Cisco 500 Series Stackable Managed Switch Administration Guide

262

16

STEP  5

Enter the parameters.

•

VLAN ID

—Defines the VLAN ID of the group to be added.

•

IP Version

—Select the IP address type. 

•

IP Multicast Group Address

—Define the IP address of the new Multicast 

group.

•

Source Specific

—Indicates that the entry contains a specific source, and 

adds the address in the IP Source Address field. If not, the entry is added as 
a (*,G) entry, an IP group address from any IP source.

•

IP Source Address

—Defines the source address to be included.

STEP  6

Click 

Apply

. The IP Multicast group is added, and the device is updated.

STEP  7

To configure and display the registration of an IP group address, select an address 
and click 

Details

. The 

IP Multicast Interface Settings

 page opens.

The VLAN ID, IP Version, IP Multicast Group Address, and Source IP Address 
selected are displayed as read-only in the top of the window. You can select the 
filter type:

•

Interface Type equals to

—Select whether to display ports or LAGs.

STEP  8

For each interface, select its association type. The options are as follows:

•

Static—Attaches the interface to the Multicast group as a static member.

•

Forbidden—Specifies that this port is forbidden from joining this group on 
this VLAN.

•

None—Indicates that the port is not currently a member of this Multicast 
group on this VLAN. This is selected by default until Static or Forbidden is 
selected.

STEP  9

Click 

Apply

. The Running Configuration file is updated.

Summary of Contents for SF500-24






























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SF500-24

D-Link DUB-H4 - Hub - USB Installation Manual preview
DUB-H4 - Hub - USB
Brand: D-Link Pages: 4
D-Link DSS-16+ Quick Install Manual preview
DSS-16+
Brand: D-Link Pages: 2
Painless Performance Products 50201 Installation Instructions preview
50201
Brand: Painless Performance Products Pages: 2
IBM N Series Setup And Configuration Manual preview
N Series
Brand: IBM Pages: 44
IBM TotalStorage 3534-F08 Installation And User Manual preview
TotalStorage 3534-F08
Brand: IBM Pages: 105
IBM RedBooks SAN24B-5 Product Manual preview
RedBooks SAN24B-5
Brand: IBM Pages: 11
IBM RedBooks SAN24B-5 Quick Start Manual preview
RedBooks SAN24B-5
Brand: IBM Pages: 2
IBM F16 User Manual preview
F16
Brand: IBM Pages: 123
IBM 8265 Nways ATM Switch User Manual preview
8265 Nways ATM Switch
Brand: IBM Pages: 192
6TL YAV904X8 Manual preview
YAV904X8
Brand: 6TL Pages: 25
DAB ESC plus 3M Instruction For Installation And Maintenance preview
ESC plus 3M
Brand: DAB Pages: 56
Aethra MTX200 Connection Manual preview
MTX200
Brand: Aethra Pages: 1
Exsys EX-1183HMVS-2W Manual preview
EX-1183HMVS-2W
Brand: Exsys Pages: 14
F&G PM 3 FG Series Installation Instructions Manual preview
PM 3 FG Series
Brand: F&G Pages: 6
LEGRAND HKRL20 Installation Manual preview
HKRL20
Brand: LEGRAND Pages: 30
S&T kontron KSwitch D4 MF User Manual preview
kontron KSwitch D4 MF
Brand: S&T Pages: 100
T1V ThinkHub Pro Quick Start Manual preview
ThinkHub Pro
Brand: T1V Pages: 2
UNICOM Smart-Switch/801 FEP-30109T-C User Manual preview
Smart-Switch/801 FEP-30109T-C
Brand: UNICOM Pages: 22

Brands by name

Popular brands

Load more brands