VLAN Management
Defining VLAN Membership
Cisco 500 Series Stackable Managed Switch Administration Guide
208
13
You can continue to display and/or configure port membership of another VLAN
by selecting another VLAN ID.
Configuring VLAN Membership
The
Port VLAN Membership
page displays all ports on the device along with a list
of VLANs to which each port belongs.
If the port-based authentication method for an interface is 802.1x and the
Administrative Port Control is Auto, then:
•
Until the port is authenticated, it is excluded from all VLANs, except guest
and unauthenticated ones. In the VLAN to Port page, the port will be marked
with “P”.
•
When the port is authenticated, it receives membership in the VLAN in
which it was configured.
To assign a port to one or more VLANs:
STEP 1
Click
VLAN Management
>
Port VLAN Membership
. The
Port
VLAN
Membership
page is displayed.
STEP 2
Select interface type (Port or LAG), and click
Go
. The following fields are
displayed for all interfaces of the selected type:
•
Interface
—Port/LAG ID.
•
Mode
—Interface VLAN mode that was selected in the
Interface Settings
page.
•
Administrative VLANs
—Drop-down list that displays all VLANs of which
the interface might be a member.
•
Operational VLANs
—Drop-down list that displays all VLANs of which the
interface is currently a member.
•
LAG
—If interface selected is Port, displays the LAG in which it is a member.
STEP 3
Select a port, and click the
Join VLAN
button. The
Join VLAN
page is displayed.
STEP 4
Enter the values for the following fields:
•
Interface
—Select a Port or LAG. Select the Unit/Slot on a 500 Series
switch.
