Administration: General Information
Viewing System Summary
Cisco 220 Series Smart Switches Administration Guide Release 1.1.0.x
62
5
•
Firmware MD5 Checksum (Non-active Image)
—MD5 checksum of the
non-active firmware image.
•
Boot Version
—Version number of the switch’s bootloader.
•
Locale
—Locale of the first language. (This is always en-US.)
•
Language Version
—Language package version of the first language.
•
Language MD5 Checksum
—MD5 checksum of the first language.
•
Locale
—Locale of the second language.
•
Language Version
—Language package version of the second language.
•
Language MD5 Checksum
—MD5 checksum of the second language.
TCP/UDP Services Status
•
HTTP Service
—Shows whether the HTTP service is enabled or disabled.
•
HTTPS Service
—Shows whether the HTTPS service is enabled or
disabled.
•
SNMP Service
—Shows whether the SNMP service is enabled or disabled.
•
Telnet Service
—Shows whether the Telnet service is enabled or disabled.
•
SSH Service
—Shows whether the SSH service is enabled or disabled.
NOTE
You can click
Edit
to go to the Security > TCP/UDP Services page to
enable or disable these services on the switch.
PoE Power Information
(only applicable for the PoE models)
•
Maximum Available PoE Power (W)
—Maximum available power that can
be delivered by the PoE ports.
•
Total PoE Power Consumption (W)
—Total PoE power delivered to the
connected PoE devices.
•
PoE Power Mode
—Port Limit or Class Limit.
NOTE
You can click
Detail
to go to the Port Management > PoE > PoE
Properties page to see more details about the PoE settings.
Other Summary Information
•
Serial Number
—Serial number.
•
PID VID
—Part number and version ID.
