Configuring Security
Configuring Management Access Methods
Cisco 220 Series Smart Switches Administration Guide Release 1.1.0.x
195
16
NOTE
If you selected any other access profile, a caution message appears warning
you that, depending on the selected access profile, you might be disconnected
from the web-based interface.
STEP 3
To add a new access profile and one rule, click
Add
.
STEP 4
Enter the following information:
•
Access Profile Name
—Enter the access profile name.
•
Rule Priority
—Enter the rule priority. When the packet is matched to a rule,
user groups are either granted or denied access to the switch. The rule
priority is essential to matching packets to rules, as packets are matched on
a first-match basis. One is the highest priority.
•
Management Method
—Select the management method for which the rule
is defined. Users with this access profile can only access the switch by using
the management method selected. The options are:
-
All
—Assigns all management methods to the rule.
-
Telnet
—Users requesting access to the switch, who meet the Telnet
access profile criteria, are permitted or denied access.
-
Secure Telnet (SSH)
—Users requesting access to the switch, who meet
the SSH access profile criteria, are permitted or denied access.
-
HTTP
—Assigns HTTP access to the rule. Users requesting access to the
switch, who meet the HTTP access profile criteria, are permitted or
denied.
-
Secure HTTP (HTTPS)
—Users requesting access to the switch, who
meet the HTTPS access profile criteria, are permitted or denied.
-
SNMP
—Users requesting access to the switch, who meet the SNMP
access profile criteria are permitted or denied.
•
Action
—Select the action attached to the rule. The options are:
-
Permit
—Permits access to the switch if the user matches the settings in
the profile.
-
Deny
—Denies access to the switch if the user matches the settings in the
profile.
•
Applies to Interface
—Select the interface attached to the rule. The options
are:
-
All
—Applies to all ports, VLANs, and LAGs.
