Cisco Prisma II, Installation Manual

Page: 157 / 184

78-4025693-01 Rev D 131
A
Appx auto letter
Appendix A
Prisma II Permitted CLI
Commands
Introduction
The following tables summarize the available CLI commands for the
Prisma II and Prisma II XD platforms. Each table lists the commands
available for one of the four major CLI prompts: CLI, */* MODULE,
TERMINAL, and ICIM.
Entries shown in parenthesis () are module-specific and must be typed
in full. Hints are given to display available entries for those cases. All
other entries may be abbreviated to the shortest unambiguous form, as
explained in the CLI online help screens.
Note: Some commands are limited to Admin level users only.
For further information and assistance when working with CLI, type
help at the appropriate CLI prompt, and then press Enter to display
the corresponding help screens.
In This Appendix

From CLI .............................................................................................. 132

From ICIM ........................................................................................... 133
 From */* MODULE ............................................................................ 139

From TERMINAL ............................................................................... 142