Cisco Prisma II, Installation Manual

Page: 111 / 184

Checking Alarms using the ICIM
78-4025693-01 Rev D 85
To View Active User Alarms
User alarms are alarms for which the user can change threshold values.
When a module ALARMS menu is selected, press the key or the key to
scroll through alarms. Typical user ALARMS menus are shown below.
To Set Adjustable Alarm Thresholds using the ICIM
You can use the ICIM to change the adjustable alarm thresholds of this module from
their factory default values.
1 At the MODULE menu, press the key. The STATUS menu appears on the
ICIM LCD.
2 Press the key. The alarm thresholds previously set are displayed. If the
label n/a is displayed, you cannot configure that alarm threshold. Press the
key to highlight the alarm threshold for the next parameter.
3 When the threshold that you wish to set is highlighted, press the key.
4
Press the key or the key to change the increment size.
5 Press the key or the key to adjust the alarm threshold.
Note: Press the Cancel ( ) key to return to the previous menu.
6 Press the key to save the changes. The message Data Saved appears on the
ICIM LCD.
7
When finished, press the key to return to the MAIN menu.