Cisco Prisma II HD-LRMW, Installation And Operation Manual

Page: 118 / 128

Appendix A
Module Parameter Descriptions
94
High Density Long Reach Multiwave and Hybrid
Modulation QAM Transmitter Parameters
Operating Status Parameters
Parameter
Name (LCI) ICIM
Abbreviation Function Typical
Value
RF Input InRF Displays relative RF input power. 0 dB
Optical Output
Power
OutPwr Displays HD-LRMW optical output
power
+12.5 dBm
Displays HQT optical output power +11.5 dBm
Module
Temperature
ModTemp Displays module temperature. Ambient °C
+ 15 °C
Laser
Temperature
LasTemp Displays laser temperature. 30 °C
TEC Current TecCur Indicates laser thermoelectric cooler
current. A positive value indicates
cooling; a negative value indicates
heating.
0.20 A
Laser RF Drive LasRF RF drive level at laser input reference to
nominal setup.
-1.5 dB
Laser Enable Enable Laser on/off. -
Low RF Alarm
Inhibit
LoRFInh Low RF alarm enabled/disabled. -
Master Master Master or Slave operation. -
RF Drive Level RFDrive RF drive level reference to nominal
setup.
0.0
AGC AGC Automatic Gain Control. -
Length FibLinDi Displays distance setting in kilometers. 50 km
Dither Dither Displays dither On/Off (usually Off). -
Laser Bias LasBias Displays measured laser bias current. 0.270 A
SBS 2 GHz PLL SbsStat SBS phase lock loop (PLL) lock status
(Lock or Fault).
Lock
SBS 2 GHz
Power
Psbs2G Indicates 2 GHz SBS power. 10.0 to 400.0
ITU ITU Displays ITU channel designator N/A
Note: