Cisco Prisma II HD-LRMW, Installation And Operation Manual

Page: 106 / 128

Chapter 4 Operation Using LCI
82
Modifying Module Alarm Limits using LCI
To Modify Alarm Limits using LCI
Using LCI, you can modify alarm limits for parameters that allow for such
changes.
1
In the module tree, right-click the module, and then click Details .
The Module Details window appears as shown in the following example. The
alarm limits are shown under
Parameters .
2
Double-click the limit you want to change.
3
The Change Value dialog box appears as shown below. This example
shows the dialog box for the Optical Output Minor High Limit parameter.