Cisco Prisma II HD-LRMW, Installation And Operation Manual

Page: 77 / 128

Configuring the Module using the ICIM
53
Configuring the Module using the ICIM
To Configure Parameters using the ICIM
You can use the ICIM to configure the parameters of this module.
1
From the MAIN menu, press the key to highlight the Shelf and
Slot fields .
2
Press the key to address the Shelf number. Then press the
key or the key to scroll to the number of the desired shelf.
3
Press the key. The Slot field is highlighted.
4
Press the key or the keys to scroll to the number of the
desired slot.
5
Press the key. The MODULE menu appears on the ICIM LCD.
6
To configure the module, press the key.
7
Press the key or the key to scroll through the configurable
controls until you find the parameter of interest.
8
Press the key to select the highlighted control.
9
Press the key or the key to activate or change the value of
the selected control.
10
Press the key to save the changes and return to the MAIN menu.
CONFIG Menus
When the CONFIG menu is selected, the Shelf number field is highlighted.
The shelf and slot number fields may only be incremented with the
key or the key. The key highlights the Slot number field. Once
you exit the slot field, the Up and Down arrows will scroll through the
parameters that are specific to this module.
Sample CONFIG menus are shown below.
q
SEL Ì
ENTER
Ì
ENTER
CFG
p q
SEL
Ì
ENTER
Ì
q