Cisco Prisma II HD-LRMW, Installation And Operation Manual

Page: 79 / 128

Checking Module Alarms using the ICIM
55
Checking Module Alarms using the ICIM
To Check Alarms using ICIM
If the red ALARM LED on the front panel is blinking, a minor alarm
condition is indicated. If the ALARM LED on the front panel is illuminated, a
critical alarm conditions is indicated.
Alarms fall into one of the following categories.
¾
Major low
¾
Minor low
¾
Minor high
¾
Major high
1
From the MAIN menu, press the key to highlight the Shelf and
Slot fields .
2
Press the key to address the Shelf number. Then press the
key or the keys to scroll to the number of the desired shelf.
3
Press the key. The Slot field is highlighted.
4
Press the key or the key to scroll to the number of the
desired slot.
5
Press the key. The MODULE menu appears on the ICIM LCD.
6
Press the key. Module alarm conditions appear on the ICIM LCD.
7
Use the key or the key to scroll through alarm conditions
until the desired alarm is displayed.
8
Monitor the alarm condition(s). Take appropriate action. Verify that all
settings and thresholds relating to the alarm indication are set correctly to
rule out an unintended alarm.
9
When finished, press the key to return to the MAIN menu.
ALARMS Menus
When a module ALARMS menu is selected, press the key or the
key to scroll through alarms. Some typical ALARMS menus are shown
below.
q
SEL Ì
ENTER
Ì
ENTER
ALRM
p q
MAIN
q
p