Cisco Prisma II HD-LRMW, Installation And Operation Manual

Page: 18 / 128

Important Safety Instructions
xvi
Accessories
Use only attachments or accessories specified by the manufacturer.
Electromagnetic Compatibility Regulatory Requirements
This equipment meets applicable electromagnetic compatibility (EMC)
regulatory requirements. Refer to this equipment's data sheet for details
about regulatory compliance approvals. EMC performance is dependent
upon the use of correctly shielded cables of good quality for all external
connections, except the power source, when installing this equipment.
¾
Ensure compliance with cable/connector specifications and associated
installation instructions where given elsewhere in this manual.
Otherwise, comply with the following good practices:
¾
Multi-conductor cables should be of single-braided, shielded type and have
conductive connector bodies and backshells with cable clamps that are
conductively bonded to the backshell and capable of making 360° connection to
the cable shielding. Exceptions from this general rule will be clearly stated in the
connector description for the excepted connector in question.
¾
Ethernet cables should be of single-shielded or double-shielded type.
¾
Coaxial cables should be of the double-braided shielded type.
EMC Compliance Statements
Where this equipment is subject to USA FCC and/or Industry Canada rules,
the following statements apply:
FCC Statement for Class A Equipment
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when this equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case users will be required to correct the interference at their own
expense.