5-33
PA-MC-T3-EC Port Adapter Installation and Configuration
OL-10589-02
Chapter 5 Configuring the Channelized Mode
Checking the Configuration
12:30-12:45 0 0 0 0 0 0 0 0 0 0 0
12:15-12:30 0 0 0 0 0 0 0 0 0 0 0
12:00-12:15 0 0 0 0 0 0 0 0 0 0 0
11:45-12:00 0 0 0 0 0 0 0 0 0 0 0
11:30-11:45 0 0 0 0 0 0 0 0 0 0 0
11:15-11:30 0 0 0 0 0 0 0 0 0 0 0
11:00-11:15 0 0 0 0 0 0 0 0 0 0 0
10:45-11:00 0 0 0 0 0 0 0 0 0 0 0
10:30-10:45 0 0 0 0 0 0 0 0 0 0 0
10:15-10:30 0 0 0 0 0 0 0 0 0 0 0
10:00-10:15 0 0 0 0 0 0 0 0 0 0 0
09:45-10:00 0 0 0 0 0 0 0 0 0 0 0
09:30-09:45 0 0 0 0 0 0 0 0 0 0 0
Total 0 0 0 0 0 0 0 0 0 0 0
(additional displayed text not shown)
Note
The PA-MC-T3-EC does not support slip buffers and always reports local controlled slip seconds (CSS)
as 0.
Note
To enable and display remote performance reports, see the
“Setting the FDL Configuration for a T1
Line” section on page 5-16
, and the
“Using the show controllers T3 remote performance Command”
section on page 5-33
.
Using the show controllers T3 remote performance Command
Use the
show controllers T3
chassis-slot/t3-port
remote performance
command to display
performance data from the remote T1 equipment.
Router#
show controllers T3 2/0 remote performance
T3 2/0 is up.
T1 1 - Remote Performance Data
Data in current interval (273 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
0 Unavail Secs
T1 2 - Remote Performance Data
Data in current interval (5 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
5 Unavail Secs
T1 3 - Remote Performance Data
Data in current interval (4 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
4 Unavail Secs
(additional displayed text not shown)