Contents
4
PA-MC-T3-EC Port Adapter Installation and Configuration
OL-10589-02
Online Insertion and Removal
3-2
Warnings and Cautions
3-3
Port Adapter Removal and Installation
3-4
Cisco 7200 VXR Routers—Removing and Installing a Port Adapter
3-5
Cisco 7201 Router—Removing and Installing a Port Adapter
3-6
Cisco 7301 Router—Removing and Installing a Port Adapter
3-7
Cables and Connectors
3-8
Connecting the Cables
3-8
C H A P T E R
4
Configuring the Unchannelized Mode
4-1
Upgrading the Field-Programmable Device Before Configuring the T3 Mode
4-1
Using the EXEC Command Interpreter
4-2
Replacing an Existing Port Adapter
4-3
Configuring an Unchannelized T3 Link
4-4
Configuring the T3 Controller
4-4
Selecting a T3 Controller
4-5
Setting Unchannelized Mode for the T3 Controller
4-5
Setting the Framing Type for the Serial Interface
4-5
Specifying the Cable Length for the Serial Interface
4-6
Setting the Clock Source for the Serial Interface
4-6
Configuring MDL Messages for the Serial Interface
4-7
Examples of MDL Message Configuration
4-7
Setting the DSU Mode for the Serial Interface
4-8
Setting the Bandwidth for the Serial Interface
4-9
Setting Scrambling for the Serial Interface
4-9
Configuring Loopback Mode for the Serial Interface
4-9
Configuring the T3 Controller to Enable Loopbacks
4-10
Shutting Down the T3 Controller
4-11
Configuring a BER Test on the T3 Controller
4-11
Sending a BER Test Pattern on the T3 Line
4-12
Viewing the Results of a BER Test
4-12
Terminating a BER Test
4-14
Performing a Basic Serial Interface Configuration
4-14
Checking the Configuration
4-15
Using show Commands to Verify the New Interface Status
4-15
Using the show version or show hardware Commands
4-17
Using the show diag Command
4-18
Using the show interfaces Command
4-19
Using the show controllers Command
4-19
