Cisco PA-2CT1 Installation And Configuration Manual Download | Manualshive

Page: 52 / 54

background image

52 Channelized T1 Port Adapter Installation and Configuration

Cisco Connection Online

When no interface cable is attached to a 2CT1 port adapter interface, issuing the loopback controller
command tests the path between the network processing engine and the interface port only (without
leaving the network processing engine and port adapter).

For complete descriptions of interface commands and the configuration options available for
Cisco 7200 series-related interfaces, refer to the publications listed in the “Related Documentation”
section on page 2.

Cisco Connection Online

Cisco Connection Online (CCO) is Cisco Systems’ primary, real-time support channel. Maintenance
customers and partners can self-register on CCO to obtain additional information and services.

Available 24 hours a day, 7 days a week, CCO provides a wealth of standard and value-added
services to Cisco’s customers and business partners. CCO services include product information,
product documentation, software updates, release notes, technical tips, the Bug Navigator,
configuration notes, brochures, descriptions of service offerings, and download access to public and
authorized files.

CCO serves a wide variety of users through two interfaces that are updated and enhanced
simultaneously: a character-based version and a multimedia version that resides on the World Wide
Web (WWW). The character-based CCO supports Zmodem, Kermit, Xmodem, FTP, and Internet
e-mail, and it is excellent for quick access to information over lower bandwidths. The WWW version
of CCO provides richly formatted documents with photographs, figures, graphics, and video, as well
as hyperlinks to related information.

You can access CCO in the following ways:

•

WWW: http://www.cisco.com

•

WWW: http://www-europe.cisco.com

•

WWW: http://www-china.cisco.com

•

Telnet: cco.cisco.com

•

Modem: From North America, 408 526-8070; from Europe, 33 1 64 46 40 82. Use the
following terminal settings: VT100 emulation; databits: 8; parity: none; stop bits: 1; and
connection rates up to 28.8 kbps.

For a copy of CCO’s Frequently Asked Questions (FAQ), contact [email protected]. For
additional information, contact [email protected].

Note

If you are a network administrator and need personal technical assistance with a Cisco

product that is under warranty or covered by a maintenance contract, contact Cisco’s Technical
Assistance Center (TAC) at 800 553-2447, 408 526-7209, or [email protected]. To obtain general
information about Cisco Systems, Cisco products, or upgrades, contact 800 553-6387,
408 526-7208, or [email protected].

«
...
50
51
52
53
54
»

Summary of Contents for PA-2CT1























































Reviews:

No comments

Related manuals for PA-2CT1

Brand: j5 create Pages: 6

Brand: KEB Pages: 28

Brand: FastTt Pages: 5

Brand: 3idee Pages: 5

Brand: Uconnect Pages: 8

Brand: Basalte Pages: 2

Cheetah Wireless-3501C

Brand: Accton Technology Pages: 50

Brand: Tripp Lite Pages: 32

Brand: 3idee Pages: 7

Brand: Accutone Pages: 8

Brand: 3idee Pages: 7

Brand: Wayne-Dalton Pages: 42

Brand: Lindy Pages: 12

Brand: Panda Wireless Pages: 10

NetBlaster ZX345

Brand: ZNYX Pages: 12

Brand: Aztech Pages: 2

Brand: Lindy Pages: 2

Brand: Belkin Pages: 168

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands