Cisco Cisco 7940 User Manual Download Page 108

Page: 108 / 186

Receiving Pager Notification

Voice Mail Features (Default Menu)

Cisco 7960/7940 Telephone User Guide

620-05600070B

Recording Personalized Mailbox Greetings

To record a personalized greeting:

Access the voice mail system.

Press

from the main voice mail menu and choose the greeting you want to

record by pressing the corresponding digit key.

•

Press

to record the No Answer greeting.

•

Press

to record the Do Not Disturb greeting.

•

Press

to record the Busy greeting.

•

Press

to record your name.

•

Press

to replace your personal greetings with the default greetings.

•

Press

to return to the main menu.

Listening to Your Greetings

You may want to check your personalized greetings to make sure they are still
appropriate.

Access the voice mail system.

Press

from the main voice mail menu and choose the greeting you want to

play by pressing the corresponding digit key.

•

Press

to play the No Answer greeting.

•

Press

to play the Do Not Disturb greeting.

•

Press

to play the Busy greeting.

•

Press

to play your name.

•

Press

to return to the main menu.

Receiving Pager Notification

The T6000 system provides the ability for you to be alerted on your mobile phone
or pager that you have received a voice message. You must set this service up with
your system administrator or via Web Portal.

Mobile devices support different types of alerts:

•

Basic numeric pages accept only keypad phone digits (1-0, * and #).

•

Cell phones support voice streaming.

•

Some cell phone models can receive text-only e-mails.

•

E-mail pagers can accept text-only e-mail messages.

You may choose to be alerted:

Summary of Contents for Cisco 7940



























































































































































































Search results

Summary of Contents for Cisco 7940

Reviews:

Related manuals for Cisco 7940

Brands by name

Popular brands

Cisco Cisco 7940, User Manual

Search results

Summary of Contents for Cisco 7940

Reviews:

Related manuals for Cisco 7940

Brands by name

Popular brands