manualshive.com logo in svg

Cisco 7911, Manual

Share
Download
Cisco 7911 Manual Download Page 65

Troubleshooting Your Phone

Cisco Unified IP Phone 7906G and 7911G for Cisco Unified CallManager 5.1 (SCCP and SIP)

57

 

Troubleshooting Your Phone

This section provides troubleshooting information for your Cisco Unified IP Phone.

General Troubleshooting

This section provides information to help you troubleshoot general problems with your phone. For 
more information, see your system administrator.

Symptom

Explanation

You cannot hear a dial 
tone or complete a call

 One or more of the following factors might apply: 

•

You must log into the Extension Mobility service.

•

You must enter a client matter code (CMC) or forced authorization 
code (FAC) after dialing a number. (SCCP phones only.)

•

Your phone has time-of-day restrictions that prevent you from using 
some features during certain hours of the day.

The softkey that you 
want to use does not 
appear

One or more of the following factors might apply: 

•

You must press 

more

 to reveal additional softkeys.

•

You must change the line state (for example, go off-hook or have a 
connected call).

•

Your phone is not configured to support the feature associated with 
that softkey.

Join

 fails (SCCP phones 

only)

Join

 requires multiple selected calls. Be sure that you have selected at least 

one call in addition to the active call, which is selected automatically.

Barge

 fails and results 

in a fast busy tone

You cannot barge an encrypted call if the phone you are using is not 
configured for encryption. When your barge attempt fails for this reason, 
your phone plays a fast busy tone.

You are disconnected 
from a call that you 
joined using 

Barge

You will be disconnected from a call that you have joined using 

Barge

 if the 

call is put on hold, transferred, or turned into a conference call.

Cisco 

CallBack

 fails

The other party might have call forwarding enabled.

Summary of Contents for 7911













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands