manualshive.com logo in svg

Cisco 7911, Manual

Share
Download
Cisco 7911 Manual Download Page 58

50

OL-11414-01

 

Controlling User Settings on the Web

User settings include your password, PIN, and language (locale) settings.

Tip

Your PIN and password allow you to access different features and services. For example, use your PIN 
to log in to Cisco Extension Mobility or Personal Directory on your phone. Use your password to log 
in to your User Options web pages and Cisco WebDialer on your personal computer. For more 
information, ask your system administrator.

If you want to...

Then do this after you log in...

Change your password

1.

Choose 

User Options > User Settings

.

2.

In the Browser Password area, enter information.

3.

Click 

Save.

Change your PIN

1.

Choose 

User Options > User Settings

.

2.

In the Phone PIN area, enter information.

3.

Click 

Save.

Change the locale (language) for 
your User Options pages

1.

Choose 

User Options > User Settings

.

2.

In the User Locale area of the User Settings page, choose an 
item from the Locale drop-down list.

3.

Click 

Save.

Change the language (locale) for 
your phone screen

1.

Go to the Device Configuration page by choosing 

User 

Options > Device

.

2.

Choose an item from the User Locale drop-down list.

3.

Click 

Save

.

Summary of Contents for 7911













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands