manualshive.com logo in svg

Cisco 7911, Manual

Share
Download
Cisco 7911 Manual Download Page 33

Advanced Call Handling

Cisco Unified IP Phone 7906G and 7911G for Cisco Unified CallManager 5.1 (SCCP and SIP)

25

 

Picking Up a Redirected Call on Your Phone

Call PickUp allows you to answer a call that is ringing on a co-worker’s phone by redirecting the call 
to your phone. You might use Call PickUp if you share call-handling with coworkers.

Tips

•

Pressing 

PickUp

 and 

GPickUp

 connects you to the call that has been ringing for the longest time.

•

Pressing 

OPickUp

 connects you to the call in the pickup group with the highest priority.

If you want to...

Then...

Answer a call that is ringing on 
another extension within your call 
pickup group

1.

Do one of the following: 

•

If the 

PickUp

 softkey is available, press it.

•

If the 

PickUp

 softkey is not available, go off-hook 

to display it, then press 

PickUp

.

If your phone supports auto-pickup, you are now 
connected to the call.

2.

If the call rings, press 

Answer

 to connect to the call.

Answer a call that is ringing on 
another extension outside of your 
group

1.

Do one of the following: 

•

If the 

GPickUp

 softkey is available, press it.

•

If the 

GPickUp

 softkey is not available, go 

off-hook to display it, then press 

GPickUp

.

2.

Enter the group pickup code.

If your phone supports auto-pickup, you are now 
connected to the call.

3.

If the call rings, press 

Answer

 to connect to the call.

Answer a call that is ringing on 
another extension in your group or 
in an associated group

1.

Do one of the following: 

•

If the 

OPickUp

 softkey is available, press it.

•

If the 

OPickUp

 softkey is not available, go 

off-hook to display it, then press 

OPickUp

.

If your phone supports auto-pickup, you are now 
connected to the call.

2.

If the call rings, press 

Answer

 to connect to the call.

Summary of Contents for 7911













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands